This is the brushless electric powered, radio controlled, almost ready to fly ElectriFly F-16 Falcon EDF.
For advanced RC pilots, not suitable for beginning or intermediate pilots. This ducted fan jet reaches speeds over 90 mph (145 km/h), and should only be flown at the flying site of an AMA-chartered club. Because it can quickly disappear from sight, the pilot should remain focused on the plane at all times.
Construction: Fiberglass fuselage with balsa and ply wing and tail assemblyWing: Balsa and ply, covered in Top Flite MonoKoteDucted Fan Unit: Hyperflow 56mm fanAileron Control: Dual servoMotor: ElectriFly Ammo 24-45-3790kV brushless inrunnerCanopy: Clear with lightweight profile pilot, attaches with magnetsLaunching System: Bungee type for easy unassisted launchesStand: Plywood
Wingspan: 22.5" (570mm)Length: 34.5" (875mm)Wing Area: 166 sq in (10.7sq dm)Weight: 32 - 34oz (910 - 960g)Wing Loading: 27.8 - 29.5oz/sq ft (85 - 90g/sq dm)Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of the wing where it meets the fuselageControl Throws: Low Rate High Rate Elevator 3/16" (9mm) 9° 5/16" (8mm) 14° Rudder 1/4" (6mm) 14° 11/32" (9mm) 20° Ailerons 1/8" (3mm) 7° 3/16" (5mm) 10°