This is the electric powered, radio controlled, almost ready to flyGreat Planes ElectroStik EP Sport Airplane.
Construction: Balsa and ply with prehinged flight surfaces and preinstalled control horns Wings: Two piece with carbon fiber wing joiner Covering: Top Flite MonoKote Aileron Control: Single servo, servo trays in wings for optional dual servo control Landing Gear: Prebent and painted aluminum Wheels: Main-two foam 2.25" (57mm) diameter, tailwheel .75" (19mm) diameter Spinner: Constructed of plastic, red in color, 2.25" (57mm) diameter Hardware: Full set included Building Time: Approximately two hours Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at date of purchase.
Great Planes ElectroStik EP ARF with landing gear, wing joiner tube, three foam wheels, spinner, hardware and instruction manual
Radio: 4-channel Servos: 3-micro 6" (152mm) Extension: For aileron servo Motor: Rimfire brushless outrunner 42-40-1000kV GPMG4675 or 42-50-800kV GPMG4700 ESC for Brushless Motors: GPMM1840 Battery: LiPo 3200mAh 11.1V 20C Discharge w/Balance connector Cell Balancer: GPMM3160 Battery Charger: LiPo compatible Propeller: 11x8.5E
Wingspan: 52.75" (1340mm) Wing Area: 589 sq in (38 sq dm) Weight: 3 - 3.5lb (1360 - 1587g) Airfoil: Semi symmetrical Wing Loading: 11.7 - 13.6oz/sq ft (36 - 42g/sq dm) Length: 45.5" (1155mm) Center of Gravity: 3-5/8" (92mm) back from leading edge of wing at fuselage
Control Throws- Low Rate High Rate Elevator up & down: 1/8" (3.2mm) 5° 1/4" (6.4mm) 10° Rudder right & left: 5/8" (15.9mm) 25° 1-1/8" (28.6mm) 50° Ailerons up & down: 3/8" (9.5mm) 15° 1/2" (12.7mm) 20°
Following are the MonoKote colors used on this model and stock numbers for six foot rolls; Missile Red, TOPQ0201 Jet White, TOPQ0204
Also available as an RXR (receiver ready) version that includes servos, prop, ESC and motor, GPMA7500.